
Concrete Batch Plants for Sale in Texas
Spec, install, commission, and support portable, self-erect, and stationary plants from Astec, RexCon, CON-E-CO, and BMH Custom.
A plant page built around real buying decisions.
Closner Equipment Co. has been the trusted dealer for concrete batch plants in Texas since 1965. We sell, install, and service new and used portable, mobile, self-erect, and stationary concrete batch plants — both central-mix and transit-mix configurations — from Astec, RexCon, CON-E-CO, and BMH Custom.
Whether you're a ready-mix producer adding capacity, a paving contractor sourcing a portable plant for a long-duration highway job, or a precast operator standing up a new line, our team specs the right plant for your sustained throughput, site constraints, and mix designs.
We provide turnkey solutions from four Texas branches: San Antonio, Austin, Dallas-Fort Worth, and Houston. Plants in this catalog range from compact under-100-yd³/hr units up to stationary high-volume builds rated above 300 yd³/hr.
Portable Project Plants
Mobile and self-erect plants for paving packages, remote jobs, and temporary production sites.
Ready-Mix Growth Yards
Expandable low-profile and transit-mix plants for producers adding capacity in Texas growth markets.
Permanent Production Facilities
Stationary central-mix, transit-mix, and custom BMH/RexCon builds for long-term yards.
Find the plant that matches your production plan.
Filter by objective, then open the dedicated model page for specs, use cases, photos, and Texas application guidance.
A clearer way to narrow the field.
The right plant depends on how often you move, how many yards you need to sustain, whether you want central-mix or transit-mix, and how much future expansion you need to protect.
Site fit
Truck flow, height limits, utilities, foundations, and plant footprint.
Plant spec
Mixer type, aggregate storage, cement storage, controls, water, and dust collection.
Install
Delivery, erection, calibration, commissioning, and operator training.
Keep running
Parts, service, troubleshooting, rebuilds, and future expansion support.
| Plant Model | Mobility | Mix Type | Capacity | Why buyers choose it |
|---|---|---|---|---|
| RexCon Mobile 5 CM | Mobile | Central mix | <100, 100-200 yd/hr | Single-load transport and front-end-loader erection for frequent moves. |
| RexCon Model S | Mobile | Central mix | 201-300, 301+ yd/hr | Portable paving production with fast pin-connected module setup. |
| RexCon Mobile 12 SE CM | Mobile, mobile and self-erect | Central mix, transit mix | 100-200, 201-300 yd/hr | Self-supporting sub-frame and hydraulic setup for faster mobilization. |
| CON-E-CO LO-PRO Series | Mobile, mobile and self-erect, stationary | Central mix, transit mix | <100, 100-200, 201-300 yd/hr | Unitized construction with bolt-on expansion for silos, dust control, and aggregate storage. |
| CON-E-CO SLP Series Central Mix | Stationary | Central mix, transit mix, transit and central | 100-200, 201-300, 301+ yd/hr | Custom stationary plant engineered around the producer's operation and property. |
| CON-E-CO ALL-PRO Series | Mobile, stationary | Central mix, transit mix | <100, 100-200, 201-300 yd/hr | All-welded unitized structure reduces foundation and setup complexity. |
| CON-E-CO 454/448 Plant | Mobile | Central mix | 201-300, 301+ yd/hr | Flexible in-line or 90-degree footprint for difficult properties. |
| RexCon RexBatch 150 | Stationary | Central mix, transit mix, transit and central | 100-200, 201-300, 301+ yd/hr | Custom stationary plant that can scale from conventional layouts to multiple truck lanes. |
| BMH Custom Series | Stationary | Central mix, transit mix, transit and central | 201-300, 301+ yd/hr | Fully tailored stationary plant design from modernization to new facility commissioning. |
| CON-E-CO Batchmaster Series | Stationary | Transit mix | <100, 100-200 yd/hr | Simple gravity-style transit-mix plant with plant-mounted cement compartments. |
The plant is only one part of the project.
Concrete plants are won or lost in the details: foundation planning, truck flow, aggregate storage, dust collection, controls, electrical, water, commissioning, and parts availability. Closner helps connect the equipment package to the site work and the production target.
Systems like CON-E-CO ALL-PRO and Batchmaster can arrive factory pre-wired and pre-plumbed, while RexCon and BMH Custom projects can be engineered around higher-output ready-mix, central-mix, and paving needs.

Turnkey Plant Delivery
Closner helps coordinate the plant package from spec and layout through delivery, erection, calibration, and first-batch commissioning.
Factory-Backed Support
As a Texas dealer for Astec brands, Closner supports RexCon, CON-E-CO, and BMH systems with parts, service, startup support, and troubleshooting.
Controls, Gates, and Wear Parts
Downtime usually starts in the small pieces. We help source batch controls, scales, gates, valves, cylinders, conveyors, dust collection, and mixer wear parts.
Field Service After Startup
Our service team stays useful after the sale: preventive maintenance, breakdown response, plant audits, rebuild planning, and future expansion support.
Parts availability is part of the value.
Every minute of downtime costs money. Closner supports batchers, gates, conveyors, scale systems, dust collectors, controls, valves, air cylinders, wear parts, and mixer components so the plant can keep producing after startup.
Use case first. Model second.
This guide organizes the major plant families by real operating need: high-volume paving, portable work, stationary facilities, expansion-focused yards, and budget-conscious reliability.
It is meant to get the conversation pointed in the right direction before Closner sizes storage, mixer configuration, controls, site layout, and installation scope.

Concrete Batch Plant Buyer FAQ
Common questions from ready-mix producers, paving contractors, and precast operators sizing and sourcing a new or used plant in Texas.
Who sells concrete batch plants in Texas?
+
Closner Equipment Co. is the authorized Texas dealer for concrete batch plants from Astec, RexCon, CON-E-CO, and BMH Custom. We sell, install, and service portable, mobile, self-erect, and stationary central-mix and transit-mix plants from four branches in Schertz (San Antonio), Elgin (Austin), Rhome (Dallas–Fort Worth), and Waller (Houston). We've been an equipment dealer in Texas since 1965.
What's the difference between portable, mobile, self-erect, and stationary concrete plants?
+
Portable plants are designed to move between job sites on standard lowboys with minimal setup. Mobile plants (sometimes called 'transportable') relocate but typically need a load or two of components and a few days to commission. Self-erect plants use hydraulic legs to raise themselves from transport position to operational position without a crane — ideal for remote sites. Stationary plants are bolted to a permanent foundation and built for the highest sustained yards-per-hour production. Closner sells all four configurations.
What's the difference between central-mix and transit-mix concrete plants?
+
A central-mix plant fully mixes concrete in a stationary drum or twin-shaft mixer at the plant before discharging into the haul truck — the truck drum just agitates during transport. A transit-mix plant batches dry materials at the plant and lets the truck drum do the actual mixing on the way to the job. Central-mix gives tighter mix quality and faster truck cycle times; transit-mix offers lower plant capital cost and flexibility on long hauls.
What concrete plant production capacity is right for our operation?
+
Under 100 yd³/hr is typical for small ready-mix operations or specialty pours. 100–200 yd³/hr fits most commercial ready-mix producers. 200–300+ yd³/hr is for high-volume DOT paving, mass-pour, and large ready-mix operations. Closner sells plants across the full range; we'll help you size to your actual sustained throughput, not your peak hour.
Do you sell used concrete batch plants in Texas?
+
Yes. Closner sells both new factory-spec plants and inspected used plants from prior owners. Used plants are listed on closner.com/inventory with original sales-order documentation, photos, and service history where available. Many of our used plants are taken in as trade-ins on new builds, so we know the maintenance history.
How long does it take to install a concrete batch plant?
+
Self-erect plants commission in a few days once on site. Portable and mobile plants typically take one to two weeks for setup, calibration, and commissioning. Stationary plants depend on the foundation pour and the level of customization — figure six to twelve weeks from delivery to first batch, with Closner's installation crew on site through commissioning. Permitting timelines vary by Texas county and TCEQ requirements; we can advise on the typical path.
What's included in a turnkey concrete plant from Closner?
+
Turnkey at Closner covers site evaluation, plant design and specification, equipment delivery, installation, commissioning, operator training, and ongoing parts and service support. We coordinate the foundation pour with your contractor (or our partners), bring in the cement silos, aggregate bins, batch controls, dust collection, and ancillaries, and stay on site through the first production batches. After commissioning we provide parts inventory, scheduled maintenance, and on-call service across all four Texas branches.
Where in Texas does Closner sell and service concrete batch plants?
+
Closner operates four Texas branches and ships plants statewide. Our service areas include San Antonio and South Texas (Schertz yard), Austin and Central Texas (Elgin yard), Dallas–Fort Worth (Rhome yard), and Houston and the Gulf Coast (Waller yard). We've installed and supported plants in every major Texas metro plus rural construction sites for highway paving, wind-farm foundations, and oilfield work.
Can Closner help with financing on a concrete batch plant?
+
Yes. Closner works with multiple equipment-finance partners that specialize in concrete and aggregate-industry capital equipment. We can structure loans, leases, and lease-to-own arrangements on both new and used plants. Talk to your salesman for current rates and term options.
What brands of concrete batch plants does Closner carry?
+
Closner is the authorized Texas dealer for Astec (including the BMH Custom Series for tailored stationary high-production plants), RexCon (Mobile 5, Mobile 12 SE, Model S, RexBatch 150), and CON-E-CO (LO-PRO Series, ALL-PRO Series, Batchmaster, SLP Series, 454/448). We also support legacy plants from these manufacturers regardless of original dealer.
Four Texas branches behind every plant.
Closner installs and services concrete batch plants statewide, with local sales, parts, and service support close to Texas's fastest-growing ready-mix markets.
San Antonio
Schertz, TX
South Texas, New Braunfels, Seguin, Laredo, Corpus Christi
210-732-2131
Austin
Elgin, TX
Central Texas, Round Rock, Georgetown, Bastrop, Waco
512-435-9178
Dallas-Fort Worth
Rhome, TX
North Texas, Denton, Tyler, Longview, Lubbock, Amarillo
817-708-9108
Houston
Waller, TX
Gulf Coast, The Woodlands, Sugar Land, Beaumont, Port Arthur
936-262-7299
Request a Concrete Batch Plant Quote
Contact our concrete division to discuss production needs, site requirements, and a turnkey quote for a new or used concrete batch plant in Texas.










