Heavy Equipment Operator Training in Texas
Operators learn the controls, the setup, and the daily checks on the machine they run.
About Operator Training
Closner trains your operators on the machine they run. The session covers the controls, the setup for the job, the daily checks, and the shutdown.
Use this training when you add a machine, add an operator, or move a crew to a different model.
What Operators Learn
An operator session follows the order of a working shift.
- 01
Controls and setup
The operator learns each control and sets up the machine for the job.
- 02
Operation on the job
The operator runs the machine through the tasks of a normal shift.
- 03
Daily checks and shutdown
The operator learns the checks, the cleaning, and the shutdown steps.
Operator Training by Equipment
These are typical topics. Closner sets the final topics for your machine, your crew, and your job.
Asphalt Pavers
Highway and commercial asphalt pavers, screeds, and road wideners
Typical topics
- Walk-around and pre-start checks
- Screed setup: heat, crown, and extensions
- Feed system, head of material, and paving speed
- Starts, stops, joints, and end-of-shift cleaning
Brands: Astec, Dynapac, LeeBoy, Mauldin, Roadtec, Carlson
Cold Planers
Roadtec RX cold planers for asphalt milling
Typical topics
- Controls, travel, and conveyor position
- Cut depth, grade, and slope setup
- Truck loading and communication with the crew
- Water system checks and end-of-shift cleaning
Brands: Astec, Roadtec
Material Transfer Vehicles
Roadtec Shuttle Buggy material transfer vehicles and Dynapac mobile feeders
Typical topics
- Truck unloading and transfer to the paver
- Conveyor and hopper controls
- Position and travel in the paving train
- Cleaning and shutdown
Brands: Astec, Dynapac, Roadtec
Rollers and Compactors
Tandem rollers, pneumatic rollers, and soil compactors
Typical topics
- Controls and pre-start checks
- Rolling pattern, speed, and overlap
- Vibration settings and water spray
- Work near edges, joints, and slopes
Brands: Dynapac, LeeBoy, Mauldin
Stabilizers and Reclaimers
Roadtec stabilizers and reclaimers
Typical topics
- Rotor and cutter housing controls
- Cut depth and travel speed
- Water and additive systems
- Daily checks and cleaning
Brands: Astec, Roadtec
Distributors and Chip Seal Equipment
Asphalt distributors, tack distributors, chip spreaders, and chip seal patchers
Typical topics
- Spray bar setup, nozzles, and application rate
- Loading, heating, and circulating material
- Chip spreader gates, rate, and width
- Flushing, cleaning, and shutdown
Brands: Rosco, LeeBoy, Mauldin
Sweepers and Brooms
Mechanical broom sweepers, regenerative air sweepers, and construction brooms
Typical topics
- Broom setup, pattern, and wear
- Water system and dust control
- Hopper, conveyor, and dumping
- Daily cleaning and inspection
Brands: Stewart-Amos, Superior Broom, Bucher Municipal, LeeBoy
Graders and Road Maintenance Equipment
Motor graders, road maintainers, pothole patchers, hot boxes, and force feed loaders
Typical topics
- Blade and steering controls on motor graders
- Material loading and heating on patchers and hot boxes
- Jobsite setup and travel
- Daily checks and cleaning
Brands: LeeBoy, Mauldin
Concrete Pavers
Slipform pavers, curb and barrier machines, placer spreaders, and bridge deck finishers
Typical topics
- Machine setup, mold, and vibrators
- Stringline or 3D guidance setup
- Paving speed, concrete head, and finishing
- Washout and end-of-pour cleaning
Brands: GOMACO, Allen Engineering
Concrete Batch Plants
Mobile, portable, and stationary concrete batch plants
Typical topics
- Batch controls and mix entry
- Scale, meter, and moisture probe checks
- Start-up, washout, and shutdown
- Aggregate, cement, and water handling
Brands: Astec, RexCon, CON-E-CO, BMH Custom
Concrete Pumps and Placing Equipment
Boom pumps, trailer pumps, Telebelt conveyors, placing systems, and shotcrete machines
Typical topics
- Setup, outriggers, and boom position
- Priming, pumping, and cleanout
- Telebelt conveyor setup and placement
- Delivery line checks
Brands: Putzmeister, Allen Engineering
Concrete Finishing Equipment
Riding trowels, walk-behind trowels, screeds, and power sprayers
Typical topics
- Controls, pitch, and steering on riding trowels
- Blade and pan selection
- Screed setup and strike-off
- Cleaning after the pour
Brands: Allen Engineering
Fuel and Service Trailers
Fuel trailers, service and lube trailers, and DEF trailers
Typical topics
- Towing setup and hitch checks
- Fuel, DEF, and lube dispensing
- Pump, reel, and meter use
- Tank filling and securing the trailer
Brands: Thunder Creek
Do Not See Your Machine?
Name the machine in your request. Closner sets the final topics for your machine, your crew, and your job.
Request Training in Three Steps
Send the form on this page, or call the Closner branch that supports your equipment.
- 01
Send the request
Name the training type, the machine, the brand, and the number of people. Use the form on this page or call your branch.
- 02
Confirm the plan
Closner confirms the topics, the place, the date, and the cost with you before the session.
- 03
Train on the equipment
Your crew trains on the machine or the plant that it runs.
Call a Closner branch
Operator Training Questions and Answers
- Which machines does Closner operator training cover?
- Operator training covers asphalt pavers, cold planers, material transfer vehicles, rollers, stabilizers, distributors, chip spreaders, sweepers, motor graders, concrete pavers, concrete pumps, trowels, batch plants, and fuel trailers.
- Where does operator training take place?
- Operator training takes place on the machine. Closner confirms the place and the date with you before the session.
- When should I request operator training?
- Request operator training when you add a machine, add an operator, or move a crew to a different model. You can also ask for it when you request a quote.
- How do I schedule operator training?
- Send the form on this page or call your Closner branch. Name the machine, the brand, and the number of people.
Request Training
Name the machine, the brand, and the number of people. Closner confirms the plan with you before the session.
Prefer to call? 210-732-2131