GOMACO GP-2400 OEM video 1
Manufacturer video for the GOMACO GP-2400 concrete paving system.
Back to Concrete Paving
GOMACO · Slipform Paver
GOMACO GP-2400 Slipform Paver
The GP-2400 is a transport-friendly GOMACO slipform paver designed for up to 16 ft standard paving and up to 24 ft with frame inserts.
Paving width
Up to 16 ft standard; up to 24 ft with inserts
Configurations
Two-track or four-track
Telescoping
Up to 6 ft left-side telescoping
Controls
GOMACO G+
Best fit
Where the GP-2400 makes the most sense
Contractors who need a proven slipform machine for standard lane work, barrier capability in four-track configuration, and frequent job-to-job mobility.
Buyer note
A strong fit when transport width, mold positioning, and a practical G+ paving package are as important as raw paving width.
Why crews compare it
Practical reasons this machine belongs on the shortlist
Built around GOMACO G+ controls for stringline or 3D machine guidance workflows.
Strong fit when rideability, slab quality, width control, and repeatable setup matter.
Closner can help match the paver, placer/spreader, texturing/curing, and bar insertion package to the paving train.
Readable specs
GP-2400 spec snapshot
Paving width
Up to 16 ft standard; up to 24 ft with inserts
Configurations
Two-track or four-track
Telescoping
Up to 6 ft left-side telescoping
Controls
GOMACO G+
Fit the pour
Closner can help compare paving width, slab profile, mix design, vibration, guidance, and production targets before a quote is built.
Plan the train
Concrete paving machines should be matched with plant capacity, haul plan, placer/spreader, work bridge, texturing, curing, and bar insertion needs.
Support locally
Four Texas branches give Closner a practical support footprint for sales, rentals, parts, and service conversations.
OEM video
Watch the GP-2400 in manufacturer video
Embedded from YouTube
GOMACO GP-2400 OEM video 2
Manufacturer video for the GOMACO GP-2400 concrete paving system.
Compare next
Similar concrete paving options
GOMACO
GP3
The GOMACO GP3 is a modern slipform paver for concrete slabs up to 30 ft wide, available in two-track or four-track configurations with G+ controls and 3D guidance compatibility.
GOMACO
GP4
The GOMACO GP4 is a high-capacity slipform paver designed for concrete paving up to 40 ft wide with G+ controls, 3D guidance compatibility, and dual telescoping frame capability.
GOMACO
GP-2600
The GP-2600 is a high-production GOMACO slipform paver with proven rideability, G+ controls, smart steering setup, and a modular frame that telescopes left up to 6.5 ft.
GOMACO
GP-4000
The GP-4000 is GOMACO's largest mainline paver class, built for high-production concrete paving from 12 ft to 50 ft in a single pass.
What is the GOMACO GP-2400 Slipform Paver best used for?
Contractors who need a proven slipform machine for standard lane work, barrier capability in four-track configuration, and frequent job-to-job mobility. Closner can help confirm whether the GP-2400 is the right fit based on paving width, profile, mix design, guidance requirements, production goal, and support needs.
Who supports the GP-2400 in Texas?
Closner Equipment supports GOMACO concrete paving equipment in Texas with sales guidance, available inventory, rental conversations, parts support, and service coordination from its Texas branch network.
What should I compare against the GP-2400?
Common comparison options include GOMACO GP3, GOMACO GP4, GOMACO GP-2600. The right answer depends on whether your work is mainline slipform paving, bridge deck overlay, barrier/profile work, tube roller paving, or paving-train support.