Putzmeister Telebelt Conveyors
TB 110
Easily Maneuvers to the Exact Point of Placement
Overview
Built for the way Texas crews work
With its low unfolding height, the TB 110 is designed for easy setup and operation in congested areas that don't allow access for large machinery or have height restrictions. The four-section telescopic conveyor provides 106' 1" (32.34m) of horizontal reach in heights as low as 15' 9" (4.80m), with the usual Putzmeister smooth, surge-free conveying. With six hopper options, it can efficiently remove large volumes and handle a wide variety of materials such as dirt, sand, stone and gravel. The Telebelt TB 110 is ideal for projects such as wind farms, dams and bridge decks.
Low unfolding height
Six hopper options to fit different job needs
Places material at high volumes
Reversing conveyor feature to switch direction of material flow
Key Specs
- Number of sections
- 4
- Conveyor Horizontal Reach
- 106'1"
- Conveyor Horizontal Reach
- 91'6"
- Conveyor Belt Width
- 18"
- Feed Conveyor Length
- 38'
- Feed Conveyor Belt Width
- 18"
- End Hose Length max.
- 15'
- Discharge height from grade
- 60'2"
Technical Specifications
TB 110 Spec Details
Specifications below are pulled from manufacturer materials and Closner product research. Final build details can change by chassis, configuration, and option package.
General Information
- Number of sections
- 4
- Conveyor Horizontal Reach
- 106'1"
- Conveyor Horizontal Reach
- 91'6"
- Conveyor Belt Width
- 18"
- Feed Conveyor Length
- 38'
- Feed Conveyor Belt Width
- 18"
- End Hose Length max.
- 15'
- Discharge height from grade
- 60'2"
- Discharge height from grade
- -20'
- Rated capacity main and feed conveyors by minute
- 5 yd3/min
- Rated capacity main and feed conveyors by minute
- 3.80 yd3/min
- Observed capacity
- 5 yd3/min
- Observed capacity
- 5 yd3/min
- Reach from Front of Truck
- 100'6"
Features
TB 110 advantages
Low unfolding height
Low unfolding height. Telebelt conveyors place concrete and bulk materials when pumping is not the best fit, including low-slump concrete, gravel, sand, aggregate, and backfill.
Six hopper options to fit different job needs
Six hopper options to fit different job needs. Telebelt conveyors place concrete and bulk materials when pumping is not the best fit, including low-slump concrete, gravel, sand, aggregate, and backfill.
Places material at high volumes
Places material at high volumes. Telebelt conveyors place concrete and bulk materials when pumping is not the best fit, including low-slump concrete, gravel, sand, aggregate, and backfill.
Reversing conveyor feature to switch direction of material flow
Reversing conveyor feature to switch direction of material flow. Telebelt conveyors place concrete and bulk materials when pumping is not the best fit, including low-slump concrete, gravel, sand, aggregate, and backfill.
Gallery
TB 110 Photos
Factory model photos and system views for a closer look at the machine.
FAQ
Common TB 110 Questions
Is the TB 110 available through Closner?
Closner can help source new Putzmeister equipment, verify current factory availability, and support parts, service, and application planning for Texas jobsites.
What should I confirm before quoting a TB 110?
Confirm material mix, target output, placement distance, vertical reach, jobsite access, power or chassis requirements, support footprint, and the service plan for the machine configuration.